Home Services Case Study  
FurnXpert is a furnace software that simplifies the job of furnace sizing, furnace setup and thermal simulation inside industrial furnaces. The software has been developed specifically for furnace designers, furnace manufacturers, metallurgists, and process engineers to simulate heat treatment process with a virtual furnace.
The simulation entails determination of optimum settings e.g., Temperature, Process Gas Flow, Speed, Time @ Temperature, and Heating Cycles. In addition, the software is used for heat losses in each heating stages, stage/zone wise thermal loading, and fuel/air demand in case of a combustion system.
For Furnace designers, it’s a useful tool to size new furnaces. For furnace operators, it provides the ability to know what goes on inside an industrial furnace and how it affects the products during heat treating process.
FurnXpert will save thousands of dollars to the furnace operators in the form of Production Increase, Energy Savings, and Scrap Reduction.
Imagine………no more trial runs for heat treating new parts!! Use FurnXpert to Size Furnaces, Setup Furnaces and Simulate Thermal Process inside furnaces.
Home | Services | Product | About Us | White Papers | Site map | Request info | Contact us
Copyright ©2006 CompAS Controls,inc. All rights reserved.
Designed & Developed by artsandlogos.com